Trumpf TruBend 5000 Series press brake tooling replacement

What tooling does a Trumpf TruBend 5000 Series use?

The Trumpf TruBend 5000 Series is cnc press brakes including bending cells and is commonly supplied with the Trumpf / Wila 20 mm safety tang, cell-specific where automated. Confirm by measuring the tang and inspecting the clamp, because machines within the same series have been delivered with more than one interface over the production life of the range.

What is specific to the Trumpf TruBend 5000 Series?

The TruBend 5000 range extends into automated bending cells. Where automation is fitted, tooling must match the handling interface as well as the tang.

• Record the machine model as well as the interface; it helps match the original specification.
• Where automation or tool changing is fitted, the handling interface matters as much as the tang.
• Segment combinations are specified per machine, because bed length varies within a series.

How do I confirm the interface on a Trumpf TruBend 5000 Series?

These four observations settle the interface on almost every machine without a site visit.

1. Measure the tang width across its widest point.
2. Measure the punch overall height from the shoulder to the tip.
3. Look for locking pin holes or a retention groove, which indicate a safety tang.
4. Measure the die body width and photograph the clamp with a ruler in shot.

What should I send for a quote?

With these items the replacement can be specified without a site visit.

1. Trumpf TruBend 5000 Series machine, with year if known.
2. Measured tang width and punch overall height.
3. A photograph of the clamp with a ruler in the frame.
4. Material grade, thickness range and the radius to be produced.
5. The length and any segment combination you need.
6. Quantity and delivery country.

Related technical pages