Can you supply Salvagnini tooling?

We supply replacement tooling made to the Salvagnini system. It is aftermarket tooling manufactured to fit that system, not genuine Salvagnini tooling, and we are not affiliated with Salvagnini.

How do I identify a Salvagnini catalogue number?

Read the number stamped or laser marked on the tool, then match it against the catalogue. Where a brand publishes an official decoding key, use that key.

Is aftermarket tooling for the Salvagnini system as good as the original?

Compatible tooling made to the same interface is a legitimate alternative. Compare the steel, the hardening, the grind accuracy and the fit against your measured tool rather than relying on the badge.

What if my Salvagnini number is not listed?

Send the number with a photograph of the tool and a ruler shot of the tang. Many numbers belong to older catalogue generations or to custom profiles that were never given a standard number.

Does Salvagnini tooling fit other systems?

Only where the interfaces genuinely match. Some systems share a nominal tang width but differ in working height or retention, so measure before assuming interchangeability.

Salvagnini Tooling Replacement

What is the Salvagnini tooling system?

Salvagnini supplies tooling under the Salvagnini-specific, including panel bender architecture. If your machine is already equipped with this system, replacement tools are specified to match it — the tang geometry, the working height and the retention method all have to agree, not just the nominal size.

Salvagnini system profile
	Salvagnini
Type	Machine builder tooling system
Origin	Italy
System	Salvagnini-specific, including panel bender architecture
Catalogue number format	Salvagnini catalogue numbers not publicly published
Replacement tooling	Aftermarket equivalent made to the system

How are Salvagnini catalogue numbers structured?

Salvagnini panel benders use their own tooling architecture rather than a standard press brake tang, so replacement tooling is specified by machine model and tool type rather than by tang dimension.

A catalogue number identifies the profile; it does not replace measuring the tool.
Worn or reground tools keep their number but lose working height.
Where a brand publishes an official decoding key, that key is authoritative — not third-party guesses at what the digits mean.

What should I send to identify a replacement?

If your catalogue number is not listed, send us the number together with a photograph of the tool and a ruler shot of the tang. We will confirm the system, angle, radius, height and segment length before you order.

The catalogue number stamped or laser marked on the tool.
The angle and tip radius, if legible.
The working height from shoulder to tip.
The total length and any segment combination.
A photograph of the tool and of the tang with a ruler in shot.

Manufacturer names and catalogue numbers on this page are used only to identify the tooling system a customer already owns, so that a compatible tool can be selected. This site is not affiliated with, authorised by, or endorsed by any of the manufacturers named. Tools described as compatible are aftermarket equivalents made to fit the named system; they are not genuine parts from the original manufacturer.

Next step

Send your Salvagnini catalogue number with a photograph and we will confirm the profile and quote a replacement made to the Salvagnini-specific, including panel bender architecture.

Request a quotation

Salvagnini tooling replacement

What is the Salvagnini tooling system?

How are Salvagnini catalogue numbers structured?

What should I send to identify a replacement?

Related technical pages

Wilson to Wila cross reference

Catalogue number index

Part number finder

Tooling standards compared

Request a quotation

Next step

Send an enquiry