Puncz /pʌntʃ/ — Press brake tooling, from A to Z. [email protected]+86 183 5532 1931
Request a quote
Home › Rolleri replacement

Replacement tooling

Rolleri tooling replacement

Rolleri is an based in Italy. Replacement tooling made to the European and Trumpf / Wila compatible tooling can be supplied as an aftermarket equivalent; it is not genuine Rolleri tooling.

Find my toolingBrowse machine makes

Last updated:

What is the Rolleri tooling system?

Rolleri supplies tooling under the European and Trumpf / Wila compatible tooling. If your machine is already equipped with this system, replacement tools are specified to match it — the tang geometry, the working height and the retention method all have to agree, not just the nominal size.

Rolleri system profile
Rolleri
TypeIndependent tooling brand
OriginItaly
SystemEuropean and Trumpf / Wila compatible tooling
Catalogue number formatCatalogue numbers not publicly published
Replacement toolingAftermarket equivalent made to the system

How are Rolleri catalogue numbers structured?

Rolleri supplies press brake tooling for European and Trumpf / Wila interfaces. Without a public number index, identification is done from the tang geometry and the tool markings.

  • A catalogue number identifies the profile; it does not replace measuring the tool.
  • Worn or reground tools keep their number but lose working height.
  • Where a brand publishes an official decoding key, that key is authoritative — not third-party guesses at what the digits mean.

What should I send to identify a replacement?

If your catalogue number is not listed, send us the number together with a photograph of the tool and a ruler shot of the tang. We will confirm the system, angle, radius, height and segment length before you order.

  1. The catalogue number stamped or laser marked on the tool.
  2. The angle and tip radius, if legible.
  3. The working height from shoulder to tip.
  4. The total length and any segment combination.
  5. A photograph of the tool and of the tang with a ruler in shot.
Manufacturer names and catalogue numbers on this page are used only to identify the tooling system a customer already owns, so that a compatible tool can be selected. This site is not affiliated with, authorised by, or endorsed by any of the manufacturers named. Tools described as compatible are aftermarket equivalents made to fit the named system; they are not genuine parts from the original manufacturer.

Related technical pages

Wilson to Wila cross reference

Published catalogue pairings for the Wila style system.

Catalogue number index

Search real catalogue numbers extracted from the official catalogues.

Part number finder

Select a tooling brand and jump to its replacement page.

Tooling standards compared

Amada, Trumpf / Wila, American and European side by side.

Request a quotation

Send the number and get a quote.

Next step

Send your Rolleri catalogue number with a photograph and we will confirm the profile and quote a replacement made to the European and Trumpf / Wila compatible tooling.

Request a quotation

Send an enquiry

Tell us the machine make and model, or describe the tooling you need. We reply to every enquiry within one business day, and quote from a drawing for special profiles.

Prefer email? Write to [email protected] — enquiries from this form go to the same address.