What replacement tooling does a Murata Wiedemann press brake use?
Murata Wiedemann press brakes built in Japan / United States are most commonly supplied with the Machine-specific interfaces interface. That is the starting point for any replacement, and it should be confirmed by measurement before a tool is ordered, because the clamp fitted to the individual machine is what actually decides the tooling.
| Murata Wiedemann | |
|---|---|
| Origin | Japan / United States |
| Machine class | Punch press and bending systems |
| Interface commonly supplied with | Machine-specific interfaces |
| Confirmation method | Measure the tang and punch height; inspect the clamp |
| Replacement tooling | Made to the confirmed interface, not a universal fit |
How do I confirm the tooling interface on a Murata Wiedemann machine?
Measure the tang width and punch height, inspect how the punch is clamped, and measure the die body. Those four observations identify the family on almost every Murata Wiedemann machine without a site visit, and they are what we need in order to quote a replacement.
- Measure the tang width across its widest point.
- Measure the punch overall height from the shoulder to the tip.
- Look for locking pin holes or a retention groove, which indicate a safety tang.
- Measure the die body width and photograph the clamp with a ruler in shot.
What is worth knowing about Murata Wiedemann tooling?
Murata Wiedemann is primarily a punch press builder; bending equipment uses machine-specific tooling.
- Tooling families share nominal dimensions more often than expected, so measure rather than assume.
- The clamp, not the tang alone, decides which holder and tool family will fit.
- If the measurements are ambiguous, a photograph of the clamp with a ruler in shot resolves it.
What do Murata Wiedemann owners usually ask for?
The replacement requests below are the ones that come up most often for machines of this make.
- Machine-specific tooling
- Replacement tooling for integrated lines
What should I send for a Murata Wiedemann tooling quote?
With these six items a replacement can be specified and quoted without a site visit.
- Murata Wiedemann machine model and year, if known.
- Measured tang width and punch overall height.
- A photograph of the clamp with a ruler in the frame.
- Material grade, thickness range and the radius to be produced.
- The length and any segment combination you need.
- Quantity and delivery country.
Related technical pages
Identify your tooling system
The four measurements that settle which interface the machine uses.
Tooling standards compared
Amada, Trumpf / Wila, American and European side by side.
Punch profiles
Straight, gooseneck, acute, radius and offset profiles.
Request a quotation
Send the measurements and get a quote against the confirmed interface.
Next step
Send the Murata Wiedemann machine details and a clamp photograph and we will confirm the interface and quote replacement tooling made for it.
Request a quotation