Puncz /pʌntʃ/ — Press brake tooling, from A to Z. [email protected]+86 183 5532 1931
Request a quote
Home › Durma replacement

Replacement tooling

Durma tooling replacement

Durma is a based in Turkey. Replacement tooling made to the European tang, Trumpf / Wila on some CNC models can be supplied as an aftermarket equivalent; it is not genuine Durma tooling.

Find my toolingBrowse machine makes

Last updated:

What is the Durma tooling system?

Durma supplies tooling under the European tang, Trumpf / Wila on some CNC models. If your machine is already equipped with this system, replacement tools are specified to match it — the tang geometry, the working height and the retention method all have to agree, not just the nominal size.

Durma system profile
Durma
TypeMachine builder tooling system
OriginTurkey
SystemEuropean tang, Trumpf / Wila on some CNC models
Catalogue number formatDurma catalogue numbers not publicly published
Replacement toolingAftermarket equivalent made to the system

How are Durma catalogue numbers structured?

Durma supplies European interfaces on most machines, with the Trumpf / Wila 20 mm system on some CNC models. The clamp fitted to the specific machine decides which applies.

  • A catalogue number identifies the profile; it does not replace measuring the tool.
  • Worn or reground tools keep their number but lose working height.
  • Where a brand publishes an official decoding key, that key is authoritative — not third-party guesses at what the digits mean.

What should I send to identify a replacement?

If your catalogue number is not listed, send us the number together with a photograph of the tool and a ruler shot of the tang. We will confirm the system, angle, radius, height and segment length before you order.

  1. The catalogue number stamped or laser marked on the tool.
  2. The angle and tip radius, if legible.
  3. The working height from shoulder to tip.
  4. The total length and any segment combination.
  5. A photograph of the tool and of the tang with a ruler in shot.
Manufacturer names and catalogue numbers on this page are used only to identify the tooling system a customer already owns, so that a compatible tool can be selected. This site is not affiliated with, authorised by, or endorsed by any of the manufacturers named. Tools described as compatible are aftermarket equivalents made to fit the named system; they are not genuine parts from the original manufacturer.

Related technical pages

Wilson to Wila cross reference

Published catalogue pairings for the Wila style system.

Catalogue number index

Search real catalogue numbers extracted from the official catalogues.

Part number finder

Select a tooling brand and jump to its replacement page.

Tooling standards compared

Amada, Trumpf / Wila, American and European side by side.

Request a quotation

Send the number and get a quote.

Next step

Send your Durma catalogue number with a photograph and we will confirm the profile and quote a replacement made to the European tang, Trumpf / Wila on some CNC models.

Request a quotation

Send an enquiry

Tell us the machine make and model, or describe the tooling you need. We reply to every enquiry within one business day, and quote from a drawing for special profiles.

Prefer email? Write to [email protected] — enquiries from this form go to the same address.