What tooling fits an Amada HG Series?

The Amada HG Series is commonly supplied with the Amada 13 mm tang, ATC-specific where fitted, but confirm by measuring the tang and inspecting the clamp, because machines in the same series have shipped with more than one interface.

Can I use Amada tooling from another series on a HG Series?

Sometimes. Within one brand the interface is often consistent across series, which allows tooling to move between machines, but exceptions exist where the clamp or the working height differs. Measure before moving tooling between machines.

Do I need the original catalogue number for an Amada HG Series?

It helps, but it is not required. The four measurements plus a clamp photograph are normally enough to identify the interface and quote a replacement.

Are HG Series tooling and standard tooling interchangeable?

Only where the interfaces genuinely match. Confirm the tang width, the punch height and the retention feature before assuming a standard tool will fit.

Amada HG Series Press Brake Tooling Replacement

What tooling does an Amada HG Series use?

The Amada HG Series is cnc press brakes including automatic tool changer configurations and is commonly supplied with the Amada 13 mm tang, ATC-specific where fitted. Confirm by measuring the tang and inspecting the clamp, because machines within the same series have been delivered with more than one interface over the production life of the range.

Amada HG Series profile
	Amada HG Series
Machine series	HG Series
Series positioning	CNC press brakes including automatic tool changer configurations
Interface commonly supplied with	Amada 13 mm tang, ATC-specific where fitted
Confirmation method	Measure the tang and punch height; inspect the clamp
Parent machine page	Amada

Interface data below describes what machines of this make are commonly supplied with. It is not a fit guarantee: confirm against the machine builder's data sheet, or by measuring the tang and inspecting the clamp before ordering.

What is specific to the Amada HG Series?

HG machines include ATC and robotic bending configurations. Where an automatic tool changer is fitted, tooling must match the magazine interface as well as the tang.

Record the machine model as well as the interface; it helps match the original specification.
Where automation or tool changing is fitted, the handling interface matters as much as the tang.
Segment combinations are specified per machine, because bed length varies within a series.

How do I confirm the interface on an Amada HG Series?

These four observations settle the interface on almost every machine without a site visit.

Measure the tang width across its widest point.
Measure the punch overall height from the shoulder to the tip.
Look for locking pin holes or a retention groove, which indicate a safety tang.
Measure the die body width and photograph the clamp with a ruler in shot.

What should I send for a quote?

With these items the replacement can be specified without a site visit.

Amada HG Series machine, with year if known.
Measured tang width and punch overall height.
A photograph of the clamp with a ruler in the frame.
Material grade, thickness range and the radius to be produced.
The length and any segment combination you need.
Quantity and delivery country.

Next step

Send the Amada HG Series details and a clamp photograph and we will confirm the interface and quote replacement tooling made for it.

Request a quotation

Amada HG Series press brake tooling replacement

What tooling does an Amada HG Series use?

What is specific to the Amada HG Series?

How do I confirm the interface on an Amada HG Series?

What should I send for a quote?

Related technical pages

All Amada press brake tooling

Amada compatible tooling

Tooling standards compared

Request a quotation

Next step

Send an enquiry