What is the Trumpf tooling system?
Trumpf supplies tooling under the Trumpf / Wila 20 mm safety tang. If your machine is already equipped with this system, replacement tools are specified to match it — the tang geometry, the working height and the retention method all have to agree, not just the nominal size.
| Trumpf | |
|---|---|
| Type | Machine builder tooling system |
| Origin | Germany |
| System | Trumpf / Wila 20 mm safety tang |
| Catalogue number format | Trumpf catalogue numbers not publicly published |
| Replacement tooling | Aftermarket equivalent made to the system |
How are Trumpf catalogue numbers structured?
Trumpf and Wila share the 20 mm safety tang interface, which is why tooling for these machines is usually described as Trumpf / Wila compatible. Locking pins retain the punch in the clamp, so a replacement must carry the same retention feature and not merely the same tang width.
- A catalogue number identifies the profile; it does not replace measuring the tool.
- Worn or reground tools keep their number but lose working height.
- Where a brand publishes an official decoding key, that key is authoritative — not third-party guesses at what the digits mean.
How are Trumpf catalogue numbers structured?
Trumpf identifies bending tools by a seven digit material number (Mat. No.). The catalogue lists one tool profile with a separate material number for each standard length — 4050, 3050, 2550, 2050, 1250, 1050 mm and shorter — so the same profile carries several material numbers depending on the length ordered. The material number identifies the tool and length combination; it does not encode the geometry, and Trumpf does not publish a decoding key for it.
- A catalogue number identifies the tool and its length combination; it does not replace measuring the tool.
- The same profile often carries several numbers, one per standard length.
- Worn or reground tools keep their number but lose working height.
Trumpf catalogue number samples
The numbers below are real catalogue numbers taken from the Trumpf catalogue (4359 distinct numbers were extracted from that catalogue). They are shown so you can recognise the format of the number stamped on your tool. Fields we could not tie to a specific number with confidence are left as a dash rather than filled in.
| Number | Type | Profile | Angle | Radius | V | Height | Max load | Weight | Length |
|---|---|---|---|---|---|---|---|---|---|
| 0823613 | Tool | — | — | — | — | — | — | — | 2050 |
| 0823818 | Tool | — | — | — | — | — | — | — | 200 |
| 0823819 | Tool | — | — | — | — | — | — | — | 300 |
| 0823820 | Tool | — | — | — | — | — | — | — | 500 |
| 0823822 | Tool | — | — | — | — | — | — | — | 2050 |
| 0823825 | Tool | — | — | — | — | — | — | — | 2050 |
| 0823826 | Tool | — | — | — | — | — | — | — | 3050 |
| 0823827 | Tool | — | — | — | — | — | — | — | 4050 |
| 0823838 | Tool | — | — | — | — | — | 400 kN/m | 26.1 kg/m | 45 |
| 0823839 | Tool | — | — | — | — | — | 400 kN/m | 26.1 kg/m | 50 |
| 0823840 | Tool | — | — | — | — | — | 400 kN/m | 26.1 kg/m | 100 |
| 0823841 | Tool | — | — | — | — | — | 400 kN/m | 26.1 kg/m | 200 |
| 0823842 | Tool | — | — | — | — | — | 400 kN/m | 26.1 kg/m | 300 |
| 0823843 | Tool | — | — | — | — | — | 400 kN/m | 26.1 kg/m | 500 |
| 0823844 | Tool | — | — | — | — | — | 400 kN/m | 26.1 kg/m | 250 |
| 0823857 | Tool | — | — | — | — | — | — | — | 200 |
| 0823858 | Tool | — | — | — | — | — | — | — | 300 |
| 0823859 | Tool | — | — | — | — | — | — | — | 500 |
| 0823860 | Tool | — | — | — | — | — | 400 kN/m | 26.1 kg/m | 2050 |
| 0823863 | Tool | — | — | — | — | — | — | — | 2050 |
| 0823867 | Tool | — | — | — | — | — | — | — | 2050 |
| 0823868 | Tool | — | — | — | — | — | — | — | 3050 |
| 0823869 | Tool | — | — | — | — | — | — | — | 4050 |
| 0823870 | Tool | — | — | — | — | — | 400 kN/m | 26.1 kg/m | 2050 |
| 0823871 | Tool | — | — | — | — | — | 400 kN/m | 26.1 kg/m | 3050 |
| 0823872 | Tool | — | — | — | — | — | 400 kN/m | 26.1 kg/m | 4050 |
| 0823882 | Tool | — | — | — | — | — | 400 kN/m | 26.1 kg/m | 45 |
| 0823883 | Tool | — | — | — | — | — | 400 kN/m | 26.1 kg/m | 50 |
| 0823885 | Tool | — | — | — | — | — | 400 kN/m | 26.1 kg/m | 100 |
| 0823886 | Tool | — | — | — | — | — | 400 kN/m | 26.1 kg/m | 200 |
Search the full catalogue number index (all 4359 Trumpf numbers, plus the other brands).
What should I send to identify a replacement?
If your catalogue number is not listed, send us the number together with a photograph of the tool and a ruler shot of the tang. We will confirm the system, angle, radius, height and segment length before you order.
- The catalogue number stamped or laser marked on the tool.
- The angle and tip radius, if legible.
- The working height from shoulder to tip.
- The total length and any segment combination.
- A photograph of the tool and of the tang with a ruler in shot.
Related technical pages
Wilson to Wila cross reference
Published catalogue pairings for the Wila style system.
Catalogue number index
Search real catalogue numbers extracted from the official catalogues.
Part number finder
Select a tooling brand and jump to its replacement page.
Tooling standards compared
Amada, Trumpf / Wila, American and European side by side.
Request a quotation
Send the number and get a quote.
Next step
Send your Trumpf catalogue number with a photograph and we will confirm the profile and quote a replacement made to the Trumpf / Wila 20 mm safety tang.
Request a quotation