Gasparini press brake tooling replacement

What replacement tooling does a Gasparini press brake use?

Gasparini press brakes built in Italy are most commonly supplied with the European tang, Trumpf / Wila on some models interface. That is the starting point for any replacement, and it should be confirmed by measurement before a tool is ordered, because the clamp fitted to the individual machine is what actually decides the tooling.

How do I confirm the tooling interface on a Gasparini machine?

Measure the tang width and punch height, inspect how the punch is clamped, and measure the die body. Those four observations identify the family on almost every Gasparini machine without a site visit, and they are what we need in order to quote a replacement.

1. Measure the tang width across its widest point.
2. Measure the punch overall height from the shoulder to the tip.
3. Look for locking pin holes or a retention groove, which indicate a safety tang.
4. Measure the die body width and photograph the clamp with a ruler in shot.

What is worth knowing about Gasparini tooling?

Gasparini builds to order with a wide range of configurations, so tooling interface varies by machine.

• Tooling families share nominal dimensions more often than expected, so measure rather than assume.
• The clamp, not the tang alone, decides which holder and tool family will fit.
• If the measurements are ambiguous, a photograph of the clamp with a ruler in shot resolves it.

What do Gasparini owners usually ask for?

The replacement requests below are the ones that come up most often for machines of this make.

• European style punches and dies
• Configured tooling sets
• Replacement tooling for custom builds

What should I send for a Gasparini tooling quote?

With these six items a replacement can be specified and quoted without a site visit.

1. Gasparini machine model and year, if known.
2. Measured tang width and punch overall height.
3. A photograph of the clamp with a ruler in the frame.
4. Material grade, thickness range and the radius to be produced.
5. The length and any segment combination you need.
6. Quantity and delivery country.

Related technical pages