What replacement tooling does an Amada Promecam press brake use?
Amada Promecam press brakes built in France / Japan are most commonly supplied with the Amada 13 mm tang / European tang interface. That is the starting point for any replacement, and it should be confirmed by measurement before a tool is ordered, because the clamp fitted to the individual machine is what actually decides the tooling.
| Amada Promecam | |
|---|---|
| Origin | France / Japan |
| Machine class | Promecam-derived press brakes under the Amada range |
| Interface commonly supplied with | Amada 13 mm tang / European tang |
| Confirmation method | Measure the tang and punch height; inspect the clamp |
| Replacement tooling | Made to the confirmed interface, not a universal fit |
How do I confirm the tooling interface on an Amada Promecam machine?
Measure the tang width and punch height, inspect how the punch is clamped, and measure the die body. Those four observations identify the family on almost every Amada Promecam machine without a site visit, and they are what we need in order to quote a replacement.
- Measure the tang width across its widest point.
- Measure the punch overall height from the shoulder to the tip.
- Look for locking pin holes or a retention groove, which indicate a safety tang.
- Measure the die body width and photograph the clamp with a ruler in shot.
What is worth knowing about Amada Promecam tooling?
Promecam-derived machines in the Amada range are common in Europe. Interfaces vary between the original European design and the later Amada 13 mm standard, so measurement is essential.
- Tooling families share nominal dimensions more often than expected, so measure rather than assume.
- The clamp, not the tang alone, decides which holder and tool family will fit.
- If the measurements are ambiguous, a photograph of the clamp with a ruler in shot resolves it.
What do Amada Promecam owners usually ask for?
The replacement requests below are the ones that come up most often for machines of this make.
- Amada compatible punches and dies
- European style tooling
- Replacement tooling for older units
What should I send for an Amada Promecam tooling quote?
With these six items a replacement can be specified and quoted without a site visit.
- Amada Promecam machine model and year, if known.
- Measured tang width and punch overall height.
- A photograph of the clamp with a ruler in the frame.
- Material grade, thickness range and the radius to be produced.
- The length and any segment combination you need.
- Quantity and delivery country.
Related technical pages
Amada compatible tooling
13 mm tang punches and dies in 835 mm segmented sets.
Tooling standards compared
Amada, Trumpf / Wila, American and European side by side.
Punch profiles
Straight, gooseneck, acute, radius and offset profiles.
Request a quotation
Send the measurements and get a quote against the confirmed interface.
Next step
Send the Amada Promecam machine details and a clamp photograph and we will confirm the interface and quote replacement tooling made for it.
Request a quotation